Vaziani ILS

**Del** · 29Sep13, 17:21

I was flying the profile for IQT4 yesterday and all was well until I tried dialing in the ILS frequency for Vaziani. I was not getting any audible tones and no indications on the HSI. The ILS was working properly at Batumi earlier in the flight and all TACAN stations were functioning properly. Once on the ground I double checked frequencies and made sure everything was set up correctly but still nothing. I also checked nearby Tsilibi and was receiving their ILS just fine.

After this I reinstalled the DCS TACAN_ILS Info*and checked in the mission editor and confirmed that the ILS appeared to be installed correctly so I tried it again this morning with the same results. I will continue to investigate on my own, but if anyone has any ideas please let me know!

Also, after installing the Hawk it appears I can rotate my head 360 degrees again in the A-10C!

Thanks!

**sMaat** · 29Sep13, 17:56

I posted the exact same problem last week. Still haven't been able to get ILS to work at Vasiani.

**Snoopy** · 29Sep13, 18:03

You sure you were flying the correct active runway?

**Del** · 29Sep13, 18:24

100% positive that I was flying the correct runway, but even if flying the wrong runway I should still get some indications that the ILS is alive.

Like I mentioned in the original post, other airports' ILS seem to be working fine and Vaziani's TACAN works fine. I'm going to start it up again here soon to pay with it some more.

**Del** · 29Sep13, 19:30

Ok, I've made some headway with this. I did a quick start mission and the Vaziani ILS worked fine. I then made a mission out of last week's training flight's track file, this was also fine. I went back to the original mission I was flying which was made from the track file of a training mission a couple of weeks ago with the same bad results. I am deleting this file and using the new one I made today and now all is functioning properly! I'm not sure what was wrong with that mission file, but I now have one that works.